Synthetic rubber, invariably a polymer, is any type of artificial elastomer mainly synthesised from petroleum byproducts. An elastomer is a material with the mechanical (or material) property that it can undergo much more elastic deformation under stress than most materials and still return to its previous size without permanent deformation. About 15 billion kilograms of rubbers are produced annually, and of that amount two thirds is synthetic.

Table of common synthetic rubbers

ISO 1629 Code Technical Name Common Names
ACM Polyacrylate Rubber
AEM Ethylene-acrylate Rubber
AU Polyester Urethane
BIIR Bromo Isobutylene Isoprene Bromobutyl
BR Polybutadiene Buna CB
CIIR Chloro Isobutylene Isoprene Chlorobutyl, Butyl
CR Polychloroprene Chloroprene, Neoprene
CSM Chlorosulphonated Polyethylene Hypalon
ECO Epichlorohydrin ECO, Epichlorohydrin, Epichlore, Epichloridrine, Herclor, Hydrin
EP Ethylene Propylene
EPDM Ethylene Propylene Diene Monomer EPDM, Nordel
EU Polyether Urethane
FFKM Perfluorocarbon Rubber
FKM Fluoronated Hydrocarbon VitonKalrez, Fluorel, Chemraz
FMQ Fluoro Silicone FMQ, Silicone Rubber
FPM Fluorocarbon Rubber
HNBR Hydrogenated Nitrile Butadiene HNBR
IR Polyisoprene (Synthetic) Natural Rubber
IIR Isobutylene Isoprene Butyl Butyl
NBR Acrylonitrile Butadiene NBR, Nitrile rubber, Perbunan, Buna-N
PU Polyurethane PU, Polyurethane
SBR Styrene Butadiene SBR, Buna-S, GRS, Buna VSL, Buna SE
SEBS Styrene Ethylene Butylene Styrene Copolymer SEBS Rubber
SI Polysiloxane Silicone Rubber
VMQ Vinyl Methyl Silicone Silicone Rubber
XNBR Acrylonitrile Butadiene Carboxy Monomer XNBR, Carboxylated Nitrile
XSBR Styrene Butadiene Carboxy Monomer
YBPO Thermoplastic Polyether-ester
YSBR Styrene Butadiene Block Copolymer
YXSBR Styrene Butadiene Carboxy Block Copolymer

 

Synthetic rubber is made by the polymerization of a variety of petroleum-based precursors called monomers. The most prevalent synthetic rubbers are styrene-butadiene rubbers (SBR) derived from the copolymerization of styrene and 1,3-butadiene. Other synthetic rubbers are prepared from isoprene (2-methyl-1,3-butadiene), chloroprene (2-chloro-1,3-butadiene), and isobutylene (methylpropene) with a small percentage of isoprene for cross-linking.